Why is the security indicator light on?

What does it mean when the security indicator light comes on?

The Security Indicator Light illuminates to indicate that the security system is either working properly or to let you know that there is a fault in the system. … While starting the car or key in the “run” position, the security lamp should illuminate briefly then go out. This a “bulb check” and is also normal.

How do I turn the security light off in my car?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How do I turn off the security light on my Nissan?

First You will need to lock the vehicle using the key in the driver’s door and then unlock it using that key as well. Next You will need to put the vehicle in the on position without the engine running and wait for the antitheft light to turn off. This can take up to 5 minutes.

THIS IS IMPORTANT:  Best answer: How does a circuit breaker protect your home?

How long should security light stay on?

How long do the security lights stay on? Most security lights have adjustable timers built into them. Some can be adjusted to stay on for as little as 10 seconds with a maximum of 30 minutes. Most home owners set their security cameras to stay on between 5 to 10 minutes.

Why is my security indicator light on Nissan Altima?

The flashing key — or sometimes a car outline with a key inside of it — is the security indicator light. This light flashes when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security system(s) equipped on the vehicle are operational.

How do you reset the security light on a Nissan Rogue?

NISSAN Vehicle Immobilizer System

  1. Leave the ignition switch in the ON position for approximately 5 seconds.
  2. Turn the ignition switch to the OFF or LOCK position and wait approximately 10 seconds.
  3. Repeat step 1 and 2 again.

What does the red dot light on the dashboard mean?

Thanks! Right, the red dot tells you when the optional “integrated vehicle alarm system with sentry key” is armed. It’s not supposed to be lit when the engine is running. Sounds like there is either a problem with the transponder in your key, or the reciever in the dash.